Configuring the Audio Clock
To be able to use VST System Link, the clock signals on your ASIO cards must be synchronized correctly.
Prerequisite
For each computer in the network, the following must apply:
-
The correct audio driver is selected in the Studio Setup dialog.
-
The clock mode or sync mode is set up in the ASIO control panel of the audio hardware.
Procedure
Result
Typically, the ASIO control panel for an audio card contains some indication of whether or not the card receives a proper sync signal, including the sample rate of that signal. This is a good indication that you have connected the cards and set up clock sync properly. Check the documentation of your audio hardware for details.