MIDI Port Setup
The MIDI Port Setup page in the Studio Setup dialog displays the connected MIDI devices and allows you to set up their ports.
-
To open the MIDI Port Setup page, select and activate MIDI Port Setup in the Devices list.
The following colums are displayed:
- Device
-
The connected MIDI devices.
- I/O
-
The port input/output status.
- Port System Name
-
The system name of the port.
- Show As
-
Allows you to rename the port. This name is used in the Input Routing and Output Routing pop-up menus.
- Visible
-
Allows you to activate/deactivate MIDI ports.
- State
-
The state of the MIDI port.
- In 'All MIDI Inputs'
-
Allows you to record MIDI data from all MIDI inputs.
NoteDeactivate this option if you use remote control devices.
The following options are available:
- Use System Timestamp for 'Windows MIDI' Inputs
-
Activate this option if you have persistent timing problems such as shifted notes. If this is activated, the system timestamp is used as a time reference.
- Use Device 'DirectMusic'
-
If you do not use a device with a DirectMusic device driver, you can leave this option deactivated. This enhances the system performance.
- Use System Timestamp for 'DirectMusic' Inputs
-
Activate this option if you have persistent timing problems such as shifted notes. If this is activated, the system timestamp is used as a time reference.