Routing Editor

The Routing Editor allows you to set up, to what speaker channels the effect is applied to.

  • To open the Routing Editor, select the track that contains the insert effect, and click Edit Channel Settings. In the Channel Settings window, click the Inserts tab, and then the Routing tab. Double-click the signal diagram for the insert effect.

The Routing Editor shows the channels in the current configuration, with signals passing from top to bottom.

  1. Outputs

    The lower squares represent the outputs from the effect plug-in.

  2. Effect plug-in

    The field in the middle represents the effect plug-in.

  3. Inputs

    The upper squares represent the inputs to the effect plug-in.

  4. Connections

    The lines represent the connections.

  5. Input channel assignment

    These buttons allow you to assign the input channels.

  6. Link

    Activate this to link the input and output channel assignment.

  7. Output channel assignment

    These buttons allow you to assign the output channels.

  8. Reset

    This button allows you to reset the original channel setup.