AmpSimulator is a distortion effect that emulates the sound of various types of guitar amp and speaker cabinet combinations. A wide selection of amp and cabinet models is available.

This auto-pan effect provides several parameters to modulate the left/right stereo position. You can use presets or create individual curves for the modulation waveform. AutoPan also allows for chopping effects by linking the modulation of left and right channel.

Brickwall Limiter ensures that the output level never exceeds a set limit.

This plug-in is a single-stage chorus effect. It doubles the audio that is sent into it with a slightly detuned version.

Compressor reduces the dynamic range of the audio, making softer sounds louder or louder sounds softer, or both.

Distortion adds crunch to your tracks.

DJ-EQ is an easy-to-use 3-band parametric equalizer that resembles the EQs found on typical DJ mixers. This plug-in is designed for quick sound fixes.

DualFilter filters out specific frequencies while allowing others to pass through.

EnvelopeShaper can be used to attenuate or boost the gain of the attack and release phase of audio material.

This is a classic flanger effect with added stereo enhancement.

Frequency 2 is a high-quality equalizer with 8 fully parametric bands. The bands can act as shelving filter, as peak or notch filter (band-pass), or as cut filter (low-pass/high-pass).

Gating, or noise gating, silences audio signals below a set threshold. As soon as the signal level exceeds the threshold, the gate opens to let the signal through.

Limiter is designed to ensure that the output level never exceeds a set output level, to avoid clipping in following devices.

Lin One Dither is a dithering plug-in that uses advanced algorithms and offers additional noise shaping to increase the apparent signal-to-noise ratio by altering the spectrum of the low-level audio signal.

Maximizer raises the loudness of audio material without the risk of clipping. The plug-in provides two modes, Classic and Modern, that offer different algorithms and parameters.

This is a mono delay effect. The delay line uses tempo-based or freely specified delay time settings.

MonoToStereo turns a mono signal into a pseudo-stereo signal. The plug-in can be used on mono audio or on stereo audio with equal channels.

MorphFilter lets you mix low-pass, high-pass, band-pass, and band-reduction filter effects, allowing for creative morphings or mixtures between two filters.

MultibandCompressor allows a signal to be split into four frequency bands. You can specify the level, bandwidth, and compressor characteristics for each band.

This plug-in can generate two additional voices that track the pitch of the input signal one octave and two octaves below the original pitch. Octaver is best used with monophonic signals.

Phaser produces the well-known swooshing phasing effect with additional stereo enhancement.

This is a stereo delay effect that alternates each delay repeat between the left and right channels. The delay line uses tempo-based or freely specified delay time settings.

REVerence is a convolution tool that allows you to apply room characteristics (reverb) to the audio.

RoomWorks SE is a smaller version of the RoomWorks plug-in. RoomWorks SE delivers high quality reverberation, but has fewer parameters and is less CPU demanding than the full version.

This modulation effect simulates the classic effect of a rotating speaker.

StereoEnhancer expands the stereo width of stereo audio material. It cannot be used with mono audio.

SuperVision is a professional tool suite for monitoring and analyzing your audio. The plug-in comes with several different modules for level, spectral, phase, or waveform analysis. Up to nine module slots allow you to create custom layouts for better overview.

ToneBooster is a filter that allows you to raise the gain in a selected frequency range. It is particularly useful if it is inserted before AmpSimulator in the plug-in chain, greatly enhancing the tonal varieties available.

Tremolo produces amplitude modulation.

This versatile compressor with integrated tube-simulation allows you to achieve smooth and warm compression effects. The VU meter shows the amount of gain reduction. Tube Compressor features an internal side-chain section that lets you filter the trigger signal.

Vibrato creates pitch modulation.

VintageCompressor is modeled after vintage type compressors.

VST Amp Rack is a powerful guitar amp simulator. It offers a choice of amplifiers and speaker cabinets that can be combined with stomp box effects.

VST Bass Amp is a bass amp simulator. It offers a choice of amplifiers and speaker cabinets that can be combined with stomp box effects.

VSTDynamics is an advanced dynamics processor. It combines three separate effects: Gate, Compressor, and Limiter, covering a variety of dynamic processing functions.

WahWah is a variable slope band-pass filter that can be auto-controlled via MIDI modeling the well-known analog pedal effect.