REVerence

REVerence is a convolution tool that allows you to apply room characteristics (reverb) to the audio.

By recording an impulse in a room, you capture the characteristics of this room. Convolution superimposes these characteristics to the sound. The result is a very natural sounding reverb. Included with this effect is a collection of high-quality reverb impulse responses.

Impulse Response: Allows you to select an impulse response. This determines the basic sound character of the reverb.
Reverse: Reverses the impulse response.
Predelay: Determines the amount of time between the dry signal and the onset of the reverb. With higher predelay values, you can simulate larger rooms.
Time: Controls the reverb time. At a setting of 100 %, the impulse response is applied with its original length.
Size: Scales the size of the simulated room. At a setting of 100 %, the impulse response is applied as recorded in the original room.
Level: Adjusts the level of the impulse response.
Equalizer: Activates the built-in three-band equalizer.
ER/Tail Split: Sets the split point between the early reflections and the reverb tail.
ER/Tail Mix: Sets the balance between the early reflections and the reverb tail. At a setting of 50 % the early reflections and the tail have the same volume level. Settings below 50 % raise the early reflections and lower the tail, as a result the sound source moves towards the front of the room. Settings above 50 % raise the tail and lower the early reflections, as a result the sound source moves towards the back of the room.