Velocity Dialog

  • To open the Velocity dialog, select a MIDI part, and select MIDI > Functions > Velocity.

Add/Subtract

Adds the specified value to the velocity value. You can enter positive or negative values.

Compress/Expand

Compresses or expands the dynamic range of MIDI notes by the specified value. You can enter values from 0 to 300 %). A factor higher than 1 (over 100 %) expands the differences between velocity values, while using a factor lower than 1 (under 100 %) compresses them.

  • To compress the dynamic range, use ratio values below 100 %.

    After compression, you can add a velocity amount to maintain the average velocity level.

  • To expand the dynamic range, use ratio values above 100 %.

    Before expansion, you can adjust the velocity to the middle of the range.

Limit

Limits the velocity values so that they stay between the Low and the High values.

Fixed To

Fixes the velocity value to the specified value.

Variance

Sets the velocities to a value between the current velocity value and a lower value. You can specify the percentage of variance.