Table of Contents
MixConsole
The MixConsole provides a common environment for producing mixes in stereo or surround. It allows you to control level, pan, solo/mute status, etc. for audio and MIDI channels. Furthermore, you can set up the input and output routing for multiple tracks or channels at the same time. You can undo/redo MixConsole parameter changes for an open project at any time.
MixConsole Window
You can open the MixConsole in a separate window.
Channel Racks
The Channel Racks section contains specific MixConsole functions, such as routing, insert, or send handling. These are organized in racks.
Channel Strips
The Channel Strip rack available for audio-related channels only. It allows you to load built-in processing modules for separate channels. You can change the position of specific modules in the signal flow via drag and drop.
EQ
You can make equalizer settings for the 4 bands. They have different default frequency values and different Q names. However, they all have the same frequency range (20 Hz to 20 kHz). You can specify different filter types for each individual module.

EQ

You can make equalizer settings for the 4 bands. They have different default frequency values and different Q names. However, they all have the same frequency range (20 Hz to 20 kHz). You can specify different filter types for each individual module.

Activate/Deactivate Band

Activates/Deactivates the equalizer band.
Select EQ Band Type

Opens a pop-up menu where you can select an EQ type for the band. Bands 1 and 4 can act as parametric, shelf, or high/low-cut filters. EQ bands 2 and 3 are always parametric filters.
Gain

Sets the amount of cut or boost. The range is ±24 dB.
Q-Factor

Determines the width of the affected frequency range. Higher values result in narrower frequency ranges.
Frequency

Sets the center frequency of the frequency range to be cut or boosted.