Statistics Window
The Statistics function analyzes the selected audio events, clips, or selection ranges.
-
To open the Statistics window for a selected audio event, clip, or selection range, select .
The Statistics window shows the following information:
- Channel
-
Shows the name of the analyzed channel.
- Min. Sample Value
-
Shows the lowest sample value in dB.
- Max. Sample Value
-
Shows the highest sample value in dB.
- Peak Amplitude
-
Shows the largest amplitude in dB.
- True Peak
-
Shows the maximum absolute level of the audio signal waveform in the continuous time domain.
- DC Offset
-
Shows the amount of DC offset as a percentage and in dB.
- Bit Depth
-
Shows the current calculated bit depth.
- Estimated Pitch
-
Shows the estimated pitch.
- Sample Rate
-
Shows the sample rate.
- Average RMS (AES17)
-
Shows the average loudness in accordance with the AES17 standard.
- Max. RMS
-
Shows the highest RMS value.
- Max. RMS All Channels
-
Shows the highest RMS value of all channels.
Loudness (EBU R 128)
- Max. Momentary Loudness
-
Shows the maximum value of all momentary loudness values, based on a time window of 400 ms. The measurement is not gated.
- Max. Short-Term Loudness
-
Shows the maximum value of all short-term loudness values, based on a time window of 3 s. The measurement is not gated.
- Integrated Loudness
-
Shows the average loudness over the whole title in LUFS (Loudness Unit, referenced to Full Scale) in accordance with EBU R 128 that recommends to normalize audio at -23 LUFS.
- Loudness Range
-
Shows the dynamic range over the whole title in LU (Loudness Units). This value allows you to see if dynamic processing is needed.
- Max. True Peak Level
-
Shows the maximum value of the audio signal waveform in the continuous time domain.