Table of Contents
Control Room
The Control Room allows you to divide the studio environment into the performing area (studio) and the engineer/producer area (control room).
Adding Channels to the Control Room
To be able to use the Control Room, you must first add the channels that you need.

Adding Channels to the Control Room

To be able to use the Control Room, you must first add the channels that you need.

Procedure

Select Studio > Audio Connections.
Click Control Room.
Make sure that Control Room is enabled.
Click Add Channel.
A pop-up menu lists all available channel types and shows how many instances of each type are available.
Select a channel type.
For most channel types, a dialog opens that allows you to choose the channel configuration.
Click the Audio Device column to set an audio device for the channel type.
Click the Device Port column to assign a port for the channel.
Important
You cannot assign the same device port to a bus or channel and a Control Room channel at the same time.

Result

The Control Room functions are available for use. If you disable the Control Room, the configuration is saved and restored when you reenable the Control Room.