Table of Contents
MixConsole
The MixConsole provides a common environment for producing mixes in stereo or surround. It allows you to control level, pan, solo/mute status, etc. for audio and MIDI channels. Furthermore, you can set up the input and output routing for multiple tracks or channels at the same time. You can undo/redo MixConsole parameter changes for an open project at any time.
MixConsole Window
You can open the MixConsole in a separate window.
Channel Sections
Specific MixConsole functions, such as routing, insert, or sends, are organized in sections.
Strip
The Strip section is available for audio-related channels only. It allows you to load built-in processing modules for separate channels. You can change the position of specific modules in the signal flow via drag and drop.
Sat
Allows you to add warmth to the sound. Open the pop-up menu to choose between Magneto II, Tape Saturation, and Tube Saturation.
Tape Saturation
This channel strip module simulates the saturation and compression of recording on analog tape machines.

Tape Saturation

This channel strip module simulates the saturation and compression of recording on analog tape machines.

Drive: Controls the amount of tape saturation.
Low Filter: A low shelving filter with fixed frequency.
High Filter: A high-cut filter. Use the frequency fader to reduce the harshness of the output signal.
Dual: Simulates the use of two tape machines.
Auto Gain: Adjusts the gain automatically.
Output: Sets the output gain.
Drive Amount LED: Indicates the amount of drive of the signal.