Table of Contents
Introduction
Setting Up
You can use Groove Agent as a plug-in for a number of host applications. Depending on the host application, you might have to make additional settings, or you might be restricted to a reduced parameter set, number of outputs, etc.
Selecting Outputs
By default, Groove Agent loads with a stereo output configuration. However, you can use up to 32 stereo outputs in the Steinberg DAW. This allows you to route all kit slots to a dedicated channel in the MixConsole.

Selecting Outputs

By default, Groove Agent loads with a stereo output configuration.

However, you can use up to 32 stereo outputs in the Steinberg DAW. This allows you to route all kit slots to a dedicated channel in the MixConsole.

Procedure

To make the outputs available in the VST instrument, open the VST Instruments window.
Click the Activate Outputs button for the instrument.
Activate the outputs that you want to use.

The Steinberg DAW automatically adds an output channel for each additional output to the MixConsole.