Instrument Pads

Instrument pads are used to trigger samples.

Each pad is mapped to a MIDI note, which can trigger a sample. If samples are assigned to a pad, the LED above the pad lights up. You can trigger the pads with different velocities. Click in the lower section of a pad for lower velocities and at the top of the pad for higher velocities.

Mute

To mute an instrument pad, click the Mute icon in the upper left corner of the pad.

Click again to unmute.

To unmute all instrument pads, click Reset All Mute below the pads.

Solo

To solo an instrument pad, click the Solo icon in the upper left corner of the pad.

Click again to unsolo.

To unsolo all instrument pads, click Reset All Solo below the pads.

Below the pad section, you find several buttons. These are different for the different agents.