Table of Contents
MixConsole
The MixConsole provides a common environment for producing mixes in stereo or surround. It allows you to control level, pan, solo/mute status, etc. for audio and MIDI channels. Furthermore, you can set up the input and output routing for multiple tracks or channels at the same time. You can undo/redo MixConsole parameter changes for an open project at any time.
MixConsole Window
You can open the MixConsole in a separate window.
Channel Sections
Specific MixConsole functions, such as routing, insert, or sends, are organized in sections.
Routing
The Routing section allows you to configure input and output routing, that is, to set up input and output busses.
Using Group Channels
You can route the outputs from multiple audio channels to a group. This enables you to control the channel levels using one fader, to apply the same effects and EQ to all channels, etc. You can also select a group channel as the input for an audio track, to record a downmix of separate tracks, for example.

Using Group Channels

You can route the outputs from multiple audio channels to a group. This enables you to control the channel levels using one fader, to apply the same effects and EQ to all channels, etc. You can also select a group channel as the input for an audio track, to record a downmix of separate tracks, for example.

Prerequisite

You have created and set up a group channel track in stereo.

Procedure

Route the group channel track to an output bus.
Add effects to the group channel as insert effects.
Route the mono audio track to the group channel.

Result

The signal from the mono audio track is sent directly to the group, where it passes through the insert effect in stereo.