Using Smart Bypass

Procedure

  1. At the top of the Master Section, click Smart Bypass.
  2. In the Smart Bypass dialog, select one of the play modes.

    You can also use key commands to select a Play option. Press A for Original Audio, B for Processed Audio + Level Correction, and C for Processed Audio.

  3. Select one of the Level Correction modes.
  4. Depending on your selection, you have the following options:

    • If you have selected Match Loudness (RMS) or Match Peaks, specify the time range that you want to analyze in the Analysis Time field, and proceed with step 5.

    • If you have selected Custom Correction, specify a value, start playback, and proceed with step 7.

  5. Play back the audio and wait for the analysis to complete.

    Wait as long as the time specified in the Analysis Time field.

  6. Click Update Gains.

    Depending on the selected correction method, the level correction that is applied is shown below the corresponding button.

    You can also press U to update the gains.

  7. Switch between the three play mode options to compare the processed audio with level correction, the processed audio without level correction, and the original audio (unprocessed).

    If you change the analysis time or start playback from another position you have to wait for the set time, and then click Update Gains again to update the analysis.