Metalizer

Sets the level balance between the dry signal and the wet signal. If the effect is used as a send effect, set this parameter to the maximum value, as you can control the dry/effect balance with the send level.

Activates/Deactivates filter modulation. If it is deactivated, Metalizer works as a static filter.

If tempo sync is activated, this is where you specify the base note value for synchronizing the effect to the tempo of the host application (1/1 to 1/32, straight, triplet, or dotted).

If tempo sync is deactivated, the modulation speed can be set freely with the Speed control.

Activates/Deactivates tempo sync.

Switches the output to mono.

Determines the character of the metal effect. Higher settings produce a more metallic sound.

Sets the character of the filter effect. The higher the value, the narrower the affected frequency area, which produces a sharper sound and a more pronounced effect.

Sets the feedback frequency. The effect of this is more noticeable with high Feedback settings.

Sets the output level.