Table of Contents
MixConsole
The MixConsole provides a common environment for producing mixes in stereo or surround. It allows you to control level, pan, solo/mute status, etc. for audio and MIDI channels. Furthermore, you can set up the input and output routing for multiple tracks or channels at the same time. You can undo/redo MixConsole parameter changes for an open project at any time.
MixConsole Window
You can open the MixConsole in a separate window.
MixConsole Toolbar
The toolbar contains tools and shortcuts for settings and functions in the MixConsole.
Linking Channels
You can link selected channels in the MixConsole to form a link group. Any change that is applied to one channel is mirrored by all linked channels, depending on which settings are activated in the link group settings. Q-Link allows you to temporarily synchronize all touched parameters of selected channels.
Creating Link Groups
You can link several channels to form a link group.

Creating Link Groups

You can link several channels to form a link group.

Procedure

Select the channels that you want to link.
Do one of the following:
- On the MixConsole toolbar, click Link.
- Right-click one of the selected channels, and select Link Selected Channels.
In the Link Group Settings dialog, activate the parameters that you want to link.
Click OK.

The number and the name of the link group are indicated above the channel name in the display line.

Note

If you link groups, insert and channel strip module linking is applied at the slot level. For example, if you change the settings for insert slot 3 on one channel, these changes are also applied to slot 3 on the other channels. Insert effects in other slots remain unaffected.
If you select a channel that belongs to a link group, all channels in this link group are selected by default. To prevent the selection of all channels that belong to a link group, deactivate Selection in the Link Group Settings dialog.