Loudness Settings

• To open the Loudness Settings dialog, select Devices > Control Room Mixer > Meter > Loudness > Configure Loudness Settings.

The following parameters are available:

1. Select Preset

   Allows you to create, load, and remove loudness presets.

2. Momentary Max

   Allows you to specify a reference value and a tolerance value for the maximum momentary loudness. If higher values are detected, the clipping indicator in the loudness meter turns red.

3. Short-Term

   Allows you to specify a reference value and a tolerance value for the short-term loudness. If higher values are detected, the clipping indicator in the loudness meter turns red.

4. Integrated

   Allows you to specify a reference value and a tolerance value for the integrated loudness. If higher values are detected, the clipping indicator in the loudness meter turns red.

5. True Peak

   Allows you to specify a reference value and a tolerance value for the true peak level. If higher values are detected, the clipping indicator in the loudness meter turns red.

6. Switch between LU and LUFS

   Allows you to switch the meter scale between LUFS (absolute values) and LU (relative values).

7. Switch between EBU +9 Scale and EBU +18 Scale

   Allows you to switch the meter between the EBU +9 scale and the EBU +18 scale.

8. Reset on Start

   Activate this option to reset all values on playback start.