Project Logical Editor Operations
The Operation column allows you to determine what to do with the Action Target.
The available operations depend on the selected Action Target. The following options are available:
- Add
-
Adds the value specified in the Parameter 1 column to the Action Target.
- Subtract
-
Subtracts the value specified in the Parameter 1 column from the Action Target.
- Multiply by
-
Multiplies the Action Target with the value specified in the Parameter 1 column.
- Divide by
-
Divides the Action Target by the value specified in the Parameter 1 column.
- Round by
-
Rounds the Action Target value using the value specified in the Parameter 1 column.
- Set Random Values Between
-
Sets the Action Target value to a random value within the range specified with Parameter 1 and Parameter 2. Note that these can be set to negative values.
- Replace
-
Replaces names with the text specified in the Parameter 1 column.
- Append
-
The name is appended with a specific string. Click the Parameter 2 column to open a pop-up menu where you can specify the string.
- Prepend
-
The name is prepended with a specific string. Click the Parameter 2 column to open a pop-up menu where you can specify the string.
- Generate Name
-
The name is replaced by the text specified in the Parameter 1 column, followed by the number set with Parameter 2. The number is increased by 1 for every found element.
- Replace Search String
-
You can specify a search string under Parameter 1 that is replaced by the text specified in the Parameter 2 column.
- Erase Before
-
Erases all characters of the name before the string that you specified in the Parameter 1 column.
- Erase After
-
Erases all characters of the name after the string that you specified in the Parameter 1 column.
- Erase Front Character
-
Erases the first character of the name.
- Erase End Character
-
Erases the last character of the name.
- Set Relative Random Values Between
-
Adds a random value to the current Action Target value. The added random value is within the range specified with Parameter 1 and Parameter 2. These can be set to negative values.
- Set to Fixed Value
-
Sets the Action Target to the value specified in the Parameter 1 column.
- Move to Cursor
-
Moves the event start to the cursor position.
- Folder
-
Opens, closes, or toggles folders.
- Record
-
Enables, disables, or toggles the record enable status.
- Monitor
-
Enables, disables, or toggles the monitor status.
- Solo
-
Enables, disables, or toggles the solo status.
- Mute
-
Enables, disables, or toggles the mute status.
- Read
-
Enables, disables, or toggles the read enable status.
- Write
-
Enables, disables, or toggles the write enable status.
- EQ Bypass
-
Enables, disables, or toggles the EQ bypass status.
- Inserts Bypass
-
Enables, disables, or toggles the inserts bypass status.
- Sends Bypass
-
Enables, disables, or toggles the sends bypass status.
- Lanes Active
-
Enables, disables, or toggles the lanes active status.
- Hide Track
-
Enables, disables, or toggles the track visibility status.
- Time Domain
-
Sets the track time domain to Musical or Linear, or toggles the status.
- Connect Output
-
This track operation routes audio outputs to a new destination. Click the Parameter 1 column to open a pop-up menu where you can select the output.
- Connect Input
-
This track operation routes audio outputs to a new destination. Click the Parameter 1 column to open a pop-up menu where you can select the input.
- Increment
-
Changes the color to the next one of the currently used color palette.
- Decrement
-
Changes the color to the previous one of the currently used color palette.
- Increment Volume in dB
-
Increments the volume of the found elements. This is used for automation only.
- Decrement Volume in dB
-
Decrements the volume of the found elements. This is used for automation only.