Noise Gate

Noise gating silences audio signals below a set threshold. As soon as the signal level exceeds the threshold, the gate opens to let the signal through.

Threshold (-60 to 0 dB): Determines the level at which Gate is activated. Signal levels above the set threshold trigger the gate to open, and signal levels below the set threshold close the gate.
Side-Chain: Activates the external side-chain.
Release (10 to 1000 ms or Auto mode): Sets the time after which the gate closes (after the set Hold time). If Auto Release is activated, Gate automatically finds the best release setting for the audio material.
State LED: Indicates whether the gate is open (LED lights up in green), closed (LED lights up in red), or in an intermediate state (LED lights up in yellow).
Attack (0.1 to 1000 ms): Sets the time after which the gate opens when it is triggered.
Range: Adjusts the attenuation of the gate when it is shut. If Range is set to , the gate is completely shut. The higher the value, the higher the level of the signal that passes through the shut gate.
Activate Filter: Activates/Deactivates the internal side-chain and allows you to set up a filter to modify the signal detection.
Filter Frequency (50 to 20000 Hz): If the internal side-chain is activated, this parameter sets the filter frequency for the signal detection.
Q-Factor (0.01 to 10000): If the internal side-chain is activated, this parameter sets the resonance of the filter for the signal detection.
Listen Filter: Allows you to monitor the filtered signal.