Level/Pan Meter Settings

In the Level/Pan Meter Settings dialog, you can adjust the behavior, scale, and color of the meters.

To open the Level/Pan Meter Settings dialog, open the Level Meter window, and select Functions > Settings.

Peak Meter Section

Peaks pop-up menu: On this pop-up menu, select Digital Peaks if you want WaveLab Yellowtec Edition to use sample values and True Peaks if you want WaveLab Yellowtec Edition to use analog reconstructed values.
Ballistics – Release Rate: Determines how fast the peak level meter falls after a peak.
Ballistics – Peak Hold Time: Determines how long a peak value is displayed. The peak can be displayed as a line or a number. If the meter's height is too narrow, only the line is displayed.
Top/Middle/Low Zone: The color buttons allow you to select colors for the low, middle, and top zones of the level meter. You can define the range for the top and middle zones by changing the corresponding values.

VU Meter (Loudness): Activates/Deactivates the VU meter.
Ballistics – Resolution: Sets the time that is used to determine the loudness. The smaller this value, the more the VU meter behaves like the peak meter.
Ballistics – Range Inertia: Sets the time that is used to determine the recent minimum and maximum value lines, and therefore determines how quickly these respond to changes in loudness.

Panning Meter: Shows/Hides the panning meter in the Level Meter window.
Range: Determines the dB range of the panning meter.
Peak and Loudness Left/Right, Global Colors: Lets you specify the colors for the different elements.

In this section, you select colors for the meter background, marks (scale units), and grid lines.

In this section, you specify the minimum and maximum values of the displayed level range.